|
Digitizer Pedestal
(Model DKT-XJ5A) |
 |
Smooth-turning
crank with precision rack & pinion. |
|
|
Gas spring
adjusts
table height from 28.5 to 44.5 inches. |
|
|
Tilt angle from
0° to near 90°. |
|
|
Includes
Levelers or optional Casters (4-Caster Set recommended, see
below). |
|
|
Single Monitor Digitizer Workstation
(Model DKT-XJ1000A) |
|
|
Includes
DKT-XJ5A Digitizer Pedestal plus Monitor Support Assembly,
(1) Monitor Arm with Keyboard Tray, and adjustable Computer
Shelf. |
|
|
Monitor
arm/keyboard tray
swivel
180°, adjusting easily to your needs. |
|
|
Monitor arm
supports 14 to 27 inch monitors. |
|
|
Small
footprint—10.5 sq. ft. |
|
|
Includes
Levelers or optional Casters (6-Caster Set recommended, see
below.) |
|
|
Double Monitor/Printer Digitizer Workstation
(Model DKT-XJ1500A) |
|
|
Includes
DKT-XJ1000A Single Monitor Digitizer Workstation plus an
additional Monitor Arm or Printer Arm. |
|
|
"Start small,
add later"—all workstations are modular. |
|
|
Includes
Levelers or optional Casters (6-Caster Set recommended, see
below). |
|
|
Computer Shelf (Model DKT-XJC1) |
|
|
Supports all
desktop PCs—tower or horizontal. |
|
|
Plan Hold-Down for 36X48 (Model
DKT-PHD) |
|
|
Fits most 36X48
digitizers. |
|
|
Plan Hold-Down for 42X60 or 36X48
(Model DKT-PHD-C) |
|
|
Fits Calcomp
36X48 Drawing Board III or GTCO 42X60. |
|
|
4-Caster Set (Model DKT-XJLC4) |
|
|
Fits DKT-XJ5A
Digitizer Pedestal. |
|
|
Includes (2)
Locking Casters and (2) Rolling Casters. |
|
|
6-Caster Set (Model DKT-XJLC6) |
|
|
Fits
DKT-XJ1000A and DKT-XJ1500A Workstations. |
|
|
Includes (2)
Locking Casters and (4) Rolling Casters. |
|
|
Table Top for 36X48 (Model
DKT-XJ-TT3648) |
|
|
Table Top
attaches to pedestal; for use with 36X48 Roll-Up Digitizer. |
|
|
Footprint:
43"x60" |
|
|
Table Top for 30X36 (Model
DKT-XJ-TT3036) |
|
|
Table Top
attaches to pedestal; for use with 30X36 Roll-Up Digitizer. |
|
|
Footprint:
43"x48" |
